The Hamo PG Line is your full pharma solution for validated cleaning. Based on a standard platform the machine design will include your specific features such as:
- Specific automation features
- Specific racks and wash good manipulation
- Qualification documentation according to your corporate requirements
- High Containment execution
- Decontamination execution
Hamo Cleaning equipment for industrial, life sciences and pharma fields are special cleaning equipment designed to process critical components such as, fermentation containers, big bottles, glassware, components of liquid- and powder-filling and packing-machines, mixers, tubes, cones,
palettes, boxes, tabletting-tools, and other parts from pharmaceutical, diagnostic and biotech industries.
Hamo Cleaning equipment are available in two sizes, to accommodate many different sizes of
goods:
Hamo PG-800
Chamber usable dimensions W x D x H, mm (inches): 800 x 800 x 1000 (31,5 x 31,5 x 39,4)
Hamo PG-1300
Chamber usable dimensions W x D x H, mm (inches): 1300 x 1300 x 1000 (51,2 x 51,2 x 39,4)
Extended height execution PG-1300 1300 x 1300 x 1300 (51,2 x 51,2 x 51,2)
allows cleaning of containers of a height
of up to 1250mm.
Chamber
The polished chamber (with only three openings) and tubing are designed to fully drain. The chamber and the tubings are designed with slopes to achieve a quick and full emptying.
The chamber is equipped with internal lighting, to be able to monitor the process during cleaning.
Glass-Doors
The units are executed in a single door-version, or as double-door if wash load shall be introduced
through the machine into a higher classified room («Bio-Seal» room separation).
The doors are made out of two hardened glass, with surrounding inflatable seals in silicon or EPDM
Load- and Unloading
By means of an external transport trolleys the machines are loaded and unloaded. Automated systems with feed- in and feed-out roller conveyors are also available.
Dosing Pumps
Up to four detergents or additives are dosed (dosing volume set-values
are part of the wash-cycle setting) into the machine. The pumps are integrated in the machine, or can optionally also be installed externally of the
machine.
Drying
The drying air is pre-filtered F8 and is, pressurized by a side-channel-blower and heated in a double wall heath exchanger – just before entering the
chamber and the wash-system- again filtered via a filter HEPA H13 (incl.
Filter-monitoring system).
Utilities
All media-supplies (except drain) are from above:
• The electrical and pneumatic supply
• Up to 3 separate water supplies
• Up to 4 additives/detergents
• Clean-air supply (eg for blow out of water intlet piping,
hollow wash goods or pre-dry of brushes)
• Supply- and exhaust air ( Drying)
Maintenance and Calibration-Friendliness
Machines working in a qualified environment have to be maintained and calibrated on a regular base.
The components in HAMO machines allow easy maintenance and quick calibration in accordance with the latest regulations. The machine concept allow easy access through doors to the control cabinet, to the dosing systems, the sensors.
Energy Efficiency
Hamo machines are built according the latest technologies to reduce the loss of energy and the use of resources. The double walled chamber are asbestos and chlorine free insulated, which reduces the heat loss to a minimum. The innovative pump and spray system reduces the use of water to an absolute minimum.
Safety
The machines are built to the latest safety guidelines: Main switch and safety circuits, pressure monitoring of the pneumatic supply, door-opening only if chamber temperature is below safety level,
dripping pan with alarm, etc.
Control
The machine is controlled via a modern Control-system (Siemens S7 1500) which stands for reliability and flexibility; it is designed and built according the latest regulations and complies with GAMP.
The visualization runs on a touch screen (HMI TP 1200); optional barcode-reader or other interfaces are available.
For more information Contact Us