Cooling Bath | Foil Roller | Pharma Process Equipment | Pharma

Cooling Bath

The cooling bath in different lengths and designs is used for efficient cooling of various extrudates before further processing by means of a winder or pelletizer. It is equipped with holding-down bars or holding-down rollers and scraper brush and mounted on damping elements. The water can be drained via a valve. In our larger cooling baths, a cooling unit can be connected and the water level is adjustable.

• Hold-down bar or hold-down rollers
• Scraper brush
• Connection for cooling water inflow
• Connection for cooling water drain (overflow valve)
• Drain valve for cooling water

Film Roller

The film roller from Three-Tec enables the calibration of flat, dry extrudates. Furthermore, round extrudates can also be rolled into a film with a defined thickness. Subsequently, the product is evenly wound onto a spool.

The film roll consists of an adjustable and temperature-controlled pair of rolls, an adjustable pair of tension rolls and a rewinder, or spool. The tensile force of the draw rollers and the rewinder spool is adjustable. This is ensured by a magnetic coupling.

The film roller is controlled by means of an integrated frequency converter. Optionally, the unit can be integrated into a higher-level system via an interface.

• Simple operation
• Adjustable traction force between film rollers, draw rollers and reel
• Integrated or external control

• Food
• Pharma
• Laboratory
• Research & Development

For more information Contact Us