The Hamo P Line is the solution for pharmaceutical cleaning with particularly small space requirements. The Hamo P Line is compatible with wash good carriers of the earlier Hamo models of type T-21 or PW. Existing baskets from these systems can therefore still be used on the P Line. The external dimensions of the system are also almost identical.
Unique solutions for your critical Cleaning Process
Hamo cleaning equipment has been designed for specific applications in the life science industries. These are used for the cleaning of critical components such as tabletting-tools, components of liquid- and powder-filling and packaging machines, medical implants and other items from the production of food, medical devices, pharmaceutical, diagnostic and cosmetic.
The cleaning equipment is designed, produced and documented according to the latest cGMP guidelines.
Cleaning Equipment with maximum Flexibility
Chamber
The chamber is designed to fully drain. The cleaning chamber is designed with slopes to achieve a quick and full emptying. The chamber is produced of 316L (1.4404) with surface quality Ra ≤ 0.8μm and is equipped with
an internal lighting, to monitor the process during cleaning.
Piping
All piping and rotating arms are made of 316L (1.4404) with surface quality Ra ≤ 0.8μm according Sanitary design. The entire piping is equipped with TRI-Clamp connections.
Glass-Doors
The units are executed in a single door-version, or as double-door if wash load shall be introduced through the machine into a higher classified room.
The doors are made of double-walled hardened glass, with surrounding Silicon-seals.
Load-and Unloading
By means of an external transport trolley the machines are loaded and unloaded. Automated systems with feed-in and feed-out roller conveyors and lifting devices are also available.
Dosing Pumps
Up to four detergents or additives are dosed by pumps into the machine (dosing volume set-values are part of the washcycle setting).
Drying
The drying air is sucked through a H8 pre-filter and finally filtered by a H13 filter, installed after the fan and electric heater, before entering the wash-system.
Utilities
All media-supplies (except drain) are from above:
• The electrical and pneumatic supply
• Up to three separate water supplies
• Up to 4 additives/detergents
• Optional clean-air supply (eg for blow-out or blow-off of wash-loads)
Service Friendliness
The machine concept allow easy access through doors to the control cabinet, to the dosing systems, the sensors, and the water-sample-probes.
Energy Efficiency
Hamo machines are built according the latest technologies to reduce the loss of energy and the use of resources. The insulation is asbestos and chloride free and reduces the heat loss to a minimum. The innovative pump and spray system reduces the use of water to an absolute minimum.
Safety
The machines are built to the latest safety guidelines: Main switch and safety circuits, pressure monitoring of the pneumatic supply, door-opening only if chamber temperature is below safety level, dripping pan with alarm, etc.
Machine Documentation
The machine is shipped with a detailed machine documentation according CE, containing eg: Manual, spare part list, layout, P&ID-plans, data-sheets, CE-conformity declaration, electrical-diagram, pneumatic-diagram etc.
Qualification-Support-Documentation (QSD)
Hamo simplifies the qualification and validation process with extensive, professional support documentation. As an experienced manufacturer of cGMP pharmaceutical cleaning machines, Hamo Cleaning Technology supplies the „as-built“ qualification documentation adapted to the respective cleaning machine and supports you with many years of experience and know-how during implementation.
For more information Contact Us