MAXIMUM FLEXIBILITY – IN X, Y, AND Z DIRECTION.
For flexible positioning of loading systems above tank openings or underneath silo outlets.
Depending on the task at hand, three different systems are used: The Muhr filling-, positioning- or discharging loading vehicles.
The right solution for every situation!
Muhr
FILLING LOADING VEHICLES
For filling silo trucks, tankers and containers with several apertures or open vehicles, when the transport vehicle is not to be moved during loading.
Ideal if the vehicle is positioned on a weigh-bridge, or when long trains are being filled: In these cases, no displacement from one aperture to the next is required, but only from railcar to railcar.
Travel paths of up to 10 m and over are possible. If required, the system can also be designed to move in a lateral direction.
Muhr
POSITIONING LOADING VEHICLES
For precision positioning of loading systems above a tank opening. Depending on the design, the loading system can be positioned either in a longitudinal or a longitudinal and lateral position relative to the container axis.
The travel paths generally total up to 1,000 mm in the longitudinal axis and up to 200 mm in the lateral axis.
Muhr
DISCHARGING LOADING VEHICLES
With an integrated docking device for discharging several silos with one loading system.
To do so, the loading vehicle initially approaches one of the silo apertures. After the dust-proof docking on the silo aperture by means of the integrated docking device and the docking of the loading system on the tank of the transport vehicle, the loading procedure can be started.
The travel path and number of silos to be emptied can be freely selected.